設置 D-Link DIR-300 無線寬頻路由器為子網路無線網路基地台
Post date: Mar 12, 2014 8:3:45 AM
連接到此無線網路基地台的電腦與會自成子網路, 與現存網絡的電腦設備不能直接溝通, 但可經現存網絡上網。
(1) 把電腦用網絡線接駁到寬頻路由器的任何一個 LAN Port
(2) 開啟瀏覽器 "http://192.168.0.1" D-Link 寬頻路由器網頁管理介面
(3) 輸入系統管理者使用者名稱 (admin) 及密碼登入
(4) 前往 "SETUP" 項內的 "Internet Setup" 頁面, 再按 "Manual Internet Connection Setup"
(5) 於 "My Internet Connection is :" 項選取為 "Dynamic IP (DHCP)"
(6) 按 "Save Settings" 鈕 > 再按 "Reboot Now" 鈕 > 寬頻路由器會自動重新啟動
(7) 前往 "SETUP" 項內的 "LAN Setup" 頁面
(8) 如預設 Router IP 與現存網絡相同, 於 "Router IP Address:" 及 "Subnet Mask:" 項填上不同固定 IP (例如 192.168.8.1)
(9) 保留勾選 "Enable DHCP Server"
(10) 按 "Save Settings" 鈕 > 再按 "Reboot Now" 鈕 > 寬頻路由器會自動重新啟動
(11) 把現存網絡用網絡線接駁到寬頻路由器的 WAN Port,不是 LAN Port
(12) 開啟瀏覽器填上固定 IP ("http://192.168.8.1") D-Link 寬頻路由器網頁管理介面
(13) 設定無線網路名稱 (SSID) 及 無線安全設定無線加密 (Wireless Security)
keyword 關鍵字 Tag 標籤 Access Point - The device links your Wireless Stations to your wired LAN. The Wireless stations and devices on the wired LAN are then on the same network, and can communicate with each other without regard for whether they are connected to the network via a wireless or wired connection.
This AP must be a valid device on your LAN, to allow management connections. You must assign a (fixed) IP address which is within the address range used on your LAN, but not within the address range used by your wired or wireless router with DHCP server enable in existing network.